CNC Turning treatment takes the setting skill of cutter track line circularly

  • Time:
  • Click:136
  • source:PHAUP CNC Machining
Process of CNC Turning treatment should pass a loop to excise surplus, rough machining and finish machining commonly 3 working procedure. Should decide according to semifinished product type and workpiece appearance the loop excises the means of surplus, reduce a loop in order to achieve to take the knife frequency, aim that improves treatment efficiency. (1) axle sleeve kind spare parts axle sleeve kind the principle that the spare parts arranges cutter track line is axial walk along knife, radial feed, the circular terminus that excises surplus circularly is near rough machining start. Can reduce knife number so, avoid needless sky to take a knife, save handling time. (2) turntable kind spare parts turntable kind the principle that the spare parts arranges is radial walk along feed of knife, axial, the circular terminus that excises surplus circularly is near rough machining start. Work out turntable kind when the machine program of the spare parts, with axle sleeve kind the spare parts is contrary, it is from big diameter end begins order forward. (3) figure of the spare parts after appearance of semifinished product of forging of casting forging casting and treatment is similar, leave the surplus with have certain for treatment. The means of circular purify surplus is cutting tool contrail moves by workpiece contour line, approach blueprint size gradually. CNC Milling CNC Machining